Welded and milled “U” profilesWelded and milled “U” profiles

 

      “LIGHT” SERIES                                                                                                               “HEAVY” SERIES

 

The welded and milled “U” profiles are obtained by welding standard laminate panels or panels obtained by laser cutting. They are then straightened and milled on the surfaces on which the bearings slide. Although they are large, they guarantee good precision and a good coupling between the bearings and the profile. They are used in heavy industry, from masts of large capacity forklifts to machines or large handling systems.

 

Code b2 Toll. B Toll. H Toll. S C α Toll. weight Wx Wy Jx Jy
[mm] [°] [Kg/m] [cm3] [cm4]
FC 123 123,3 ±0,15 175 ±1,5 66 ±1 16 * 90 ±0,5 42,37 249 87 2181,5 206
FC 149 149,4 ±0,15 202 ±1,5 71,2 ±1 19,4 * 90 ±0,5 52,31 345 114 3480,6 344,6
 
FC 165 165,4 ±0,15 230 ±1,5 67,5 ±1 18 80 90 ±0,5 53,3 384 88 383,5 174,6
FC 190 190,4 ±0,15 255 ±1,5 77 ±1 22 80 90 ±0,5 73,7 599 168 7631,6 434,2
FC 220 220,4 ±0,15 295 ±2 85 ±1 20 125 90 ±0,5 86,1 657 323 12633 6720,4
FC 250 250,4 ±0,15 344 ±2 94 ±1 26,5 125 90 ±0,5 122,8 1359 345 1117,4 1358,8
FC 280 280,4 ±0,15 394 ±2 114 ±1 26,5 125 90 ±0,5 161,9 2156 577 42473 2354,8
Material: UNI Fe 510C – Wnr. 1.0553 – DIN St. 52-3 U – EN 10025 (S355J0)
Maximum production length: 12 meters
Contact our technical office for more information

Welded and milled “U” profiles

CONTATTO VELOCE