Welded and milled “H” profiles   Welded and milled “H” profiles

 

“LIGHT” SERIES                                                                                                       “HEAVY” SERIES

 

The welded and milled “H” profiles are obtained by welding standard laminate panels or panels obtained by laser cutting.

They are then straightened and milled on the surfaces on which the bearings slide.Although they are large, they guarantee good precision and a good coupling between the bearings and the profile.

They are used in heavy industry, from masts with large capacity forklifts to machines or large handling systems.

 

Codice b2 Toll. B Toll. H Toll. S C α Toll. Massa Wx Wy Jx Jy
[mm] [°] [Kg/m] [cm3] [cm4]
FM 108 108 ±0,2 153 / 80 ±1 13 / 14 ±0,5 39,8 223,3 48,5 1708,0 194
FM 123 123,3 ±0,2 176 / 90 ±1 13 / 15 ±0,5 52,3 335,6 71,9 2652,9 323,8
FM 149 149,3 ±0,2 205 / 118 ±1 13 / 15 ±0,5 72,9 560,3 130,4 5742,0 769,5
 
FM 165 165,4 ±0,15 230 ±1,5 95 ±1 20 70 80 ±0,5 71 600 99 6894 472
FM 190 190,4 ±0,15 255 ±1,5 130 ±1 25 70 80 ±0,5 100 941 185 12002 1203
FM 220 220,4 ±0,15 295 ±1,5 150 ±1 25 90 100 ±0,5 128 1423 283 20991 2119
FM 250 250,4 ±0,15 345 ±1,5 160 ±1 30 90 100 ±0,5 175 2206 409 37838 3274
FM 280 280,4 ±0,15 395 ±2 190 ±1 35 120 100 ±0,5 245 2942 578 55163 5492
 
Material: UNI Fe 510C – Wnr. 1.0553 – DIN St. 52-3 U – EN 10025 (S355J0)
Maximum production length: 12 meters
Contact our technical office for more information

 

Welded and milled “H” profiles

CONTATTO VELOCE