“U” machined profiles

 

 

 

 

The “U” machined profiles are obtained directly from the rolled U profiles. The surfaces on which the combined bearings slide are machined with a machine tool, resulting in an excellent surface finish with extremely limited tolerances. This guarantees an absolutely precise coupling between the bearing and the profile, reduces the play between them up to the stop and thus becomes an excellent economical alternative to linear guides on the market.

 

Code b2 Toll. B b1 H s Toll. t α Toll. weight Wx Wy
[mm] [°] [Kg/m] [cm3]
2890L 65 ±0,2 86,5 / 35 6,5 -0,3 9 90 ±0,5 9,44 28,3 10,7
2867L 74 ±0,2 103 / 39 7 -0,3 10 90 ±0,5 13,14 48,2 16,3
2810L 82 ±0,2 121 / 39 9 -0,3 13 90 ±0,5 17,87 73,5 21,4
2811L 93 ±0,2 135,5 / 51 11 -0,3 15 90 ±0,5 25,16 116,9 39,6
2862L 112 ±0,2 157 / 59 12 -0,3 17 90 ±0,5 31,47 172,9 59,1
2891L 128 ±0,2 175 / 64 14 -0,3 17 90 ±0,5 37,71 198 66,4
2757L 154 ±0,2 201 / 69 17 -0,3 20 90 ±0,5 45,98 269,4 74,8
W0018-10L 185,1 ±0,2 252,5 / 87 16,4 -0,3 20 90 ±0,5 70,6 633,7 111,9
Material: UNI Fe 510C – Wnr. 1.0553 – DIN St. 52-3 U – EN 10025 (S355J0)
Maximum production length: 12 meters
Contact our technical office for more information

 

“U” machined profiles

CONTATTO VELOCE