CAM FOLLOWERS FIXED COMBINED WITH AXIAL STEEL ROLLERS
The main feature of this series is the high thickness of the outer ring, suitable to withstand the high pressures, the bumps that characterize the use of these bearings and in the while ensuring axial support.
On the main pin there are reference niches for the correct mounting is provided, if an eccentric adjustment bush on the pin is required.
Outer rings: 18NiCrMo5 cemented, tempered
Inner rings: 100Cr6 hardened and found with a final hardness of 60 ± 2 HRc
Studs: Fe 52 is not thermally treated
Fifth wheels: 20MnCr5 cemented, hardened and found with final surface hardness of 60 ± 2 HRc
The bearings are in “ZRS” execution